Sea-bird USB Devices Driver Download

LG USB Drivers Ver. 4.5.0 and LG USB Drivers Ver 4.4.2 In this post, you can download and install the latest LG USB Drivers Ver 4.5.0 for your LG Phones or tablets. In order to establish communications between your LG devices and computer, you need to install the latest LG Drivers properly onto your computer. Right-click on your Desktop, choose New Folder, and name the folder something like USB Drivers. Once you've downloaded the drivers from this page, double-click on ST1USB98.exe. It will ask where you want to unzip them.

Our Device Description

MFS100 is brand of Mantra softech - STQC, GOVT. OF INDIA certifed USB Fingerprint scanner equivalent to FBI PIV certification.

MFS100 OPTICAL FINGERPRINT SENSOR - STQC certified single finger scanner MFS100 is high quality USB fingerprint sensor for fingerprint authentication in desktop or network security. MFS100 is based on optical sensing technology which efficiently recognizes poor quality fingerprints also. MFS100 can be used for authentication, identification and verification functions that let your fingerprint act like digital passwords that cannot be lost, forgotten or stolen. Hard optical sensor is resistant to scratches, impact, vibration and electrostatic shock.

About STQC - Standardisation Testing and Quality Certification (STQC) Directorate is an attached office of the Department of Electronics and Information Technology, Government of India. Apart from STQC, MFS100 is CE, FCC, RoHS, WHQL, CB 60950 approved. Equivalent to FBI PIV certification. MFS100 is suitable fingerprint scanner for all Aadhaar project for Uidai(uid) project of Govt. of India.

*Only compatible with Windows Vista/7/8/10 OS (Does not operate on Mac OS)

Download

This article includes all of the software downloads. Navigate through the tabs to select the software you need, click on the red 'Click here' link to download the program of your choice.


Device Updater

OS Requirements: Windows Vista/7/8/10

*Used to download updates for GTX, BDX, X4, Livewire, ITSX

Windows

Click hereto download the Device Updater.

Make sure all devices are unplugged during the install process.


Livelink Gen-II

OS Requirements: Windows Vista/7/8/10

*Datalogging software.

Click hereto download Livelink Gen-II.

Make sure all devices are unplugged during the install process.

What


Advantage III

OS Requirements: Windows Vista/7/8/10

Click hereto download Advantage III.

Make sure all devices are unplugged during the install process.

Sea-bird USB Devices Driver Download


Drivers


Windows 32bit drivers click here.

Windows 64bit drivers click here.


Install Instructions


If you installed the SCT device updater before you plugged the device in then this should be easy to fix.

With your device connected:

Open your computers Device Manager.

Devices

Look for a device that is not installed like one with a yellow exclamation mark. (Here is a screenshot of what you are looking for.)

If you see this, right click it and select update driver.

A new window should open up and give you the option to either automatically search, or browse for files.

Click browse for files

Navigate to the folder you downloaded, and select “Open”.

If you did this correctly, it’ll tell you your drivers have successfully been updated and once you click “OK” you should see something similar to the picture below.

Now your communication should work between the device and the computer. With most devices, you will want to unplug it and plug it back in and restart the device updater. Then click “Display Device Settings and Serial” and if the serial number shows up, it is communicating.

Seabird Usb Devices Driver Download Windows 7

Update Agent for GT's


How do I update my Bully Dog GT Tuner?


Basic Steps to Update a GT Tuner

1. Run the Update Agent.

2. Connect the Micro SD card to your computer.

3. Choose the vehicle application and let the Agent search.

4. Click the Update button.

5. When the Update is finished, put the Micro SD card in the GT.

6. Update the GT Platinum from the SD card by choosing Update GT Software, or Update GT Firmware on the Main Menu. (option will be all the way at the bottom of the main menu.)


Detailed Steps to Update a GT Tuner

Where do I Find the Bully Dog Light Duty Update Agent for a Bully Dog Gauge GT Tuner?


To install the Bully Dog Light Duty Update Agent please open the following link. Then open and run the file.


  1. Open the update agent. Note: the tune will need to be uninstalled from your vehicle to update. You can check the vehicle is stock by going to show settings, the status will read “installed” or “not installed”
  2. Connect the SD with either the card reader or the GT itself and the USB cable
  3. Highlight the card in the update agent, and select “select device”

4. Select your device (40417, 40420, etc.) then select “download and upgrade”

5. Wait for the download to finish, you will see this message.

6. Select ok, then with the sd card in the device, go to change vehicle at the top of the menu, if it is the first time updating, and select your vehicle. Or go to update software at the bottom of the main menu to update with the latest files.




Kinds Of Usb Devices