Realtek Network & Wireless Cards Driver Download For Windows

Summary :

If you are experiencing the error “the Realtek Network Controller was not found” in Windows 10/7, you may ask: how do I fix Realtek network controller not found? Take it easy now and you can get some methods from this post from MiniTool Solution.

The Realtek Network Controller Was Not Found If Deep Sleep Mode Is Enabled

Realtek Network & Wireless Cards Driver Download For Windows

In a computer, there are many component parts. From time to time, one of them may fail to work or cause an error, which is not surprising. In today’s post, we will introduce the Realtek Network Controller error to you.

The detailed error message says “The Realtek Network Controller was not found. If Deep Sleep Mode is enabled Please Plug the Cable”, as shown below.

If your Realtek network interface controller is 10/100/1000M Gigabit Ethernet, then it can deliver up to 1000 MB/sec internet speed. If your Realtek PCIe FE Family Controller is a 10/100M network device, it means its maximum speed is 100 MB/sec. FE means Fast Ethernet that is 10/100 MB/sec. After a Windows 10 upgrade, I was no longer able to access the internet. I opened the Network and Internet Sharing tab and their was no wifi option in the left pane. I connected to the internet via Ethernet. I looked in my device manager and did not find the Realtek wifi network adapter. Only the Family Controller. Select Realtek network driver. A complete list of available drivers for various Realtek network chipsets. On this page you will find the available drivers sorted by the specific chipset and operating system (Windows XP, Windows Vista, Windows 7, Windows 8 / 8.1 and Windows 10). Realtek networking is built into many motherboards. Cost-wise, you just can’t compete with a Realtek NIC that costs $3.55, shipped. And when you buy a motherboard, odds are there’s a Realtek chipset on the board unless it’s an enthusiast board. A universal driver adding support for Realtek network devices. The Realtek Ethernet All-in-One Windows Driver is intended for the installation of 'Realtek FE/GbE Family Controller' under most operating systems. If this package has been installed, updating (overwrite-installing) this package will fix problems, add new functions, or expand functions.

The error means you cannot start the network card because it doesn’t come out of Sleep Mode with other computer components. In order to fix this issue, now you should try these methods below.

Solutions to “the Realtek Network Controller Was Not Found” Windows 10/7

Update or Reinstall Your Network Driver

When getting the above error message on your PC, you can try to update or reinstall the network driver. Here is the guide:

Realtek Network & Wireless Cards Driver Download For Windows 7

Step 1: Open Device Manager.

Step 2: Expand Network adapters and right-click Realtek PCIe GBE Family Controller to click Update Driver Software (sometimes Update Driver) to update the network driver, and then let Windows automatically search for and install the updated driver software.

To reinstall the network driver, you should click Uninstall. Then, go to the official site of your manufacturer to download the necessary software and install it on your PC.

Prevent Your Adapter from Getting into Sleep Mode

“The Realtek Network Controller was not found if Deep Sleep Mode is enabled please plug the cable” error appears since the network adapter is in sleep mode. To get rid of the error, you can change the Sleep Mode setting to prevent the adapter from getting into Sleep Mode.

Step 1: Also, you need to launch Device Manager.

Step 2: Double-click Realtek PCIe GBE Family Controller.

Step 3: Under the Power Management tab and uncheck the box of Allow the computer to turn off this device to save power.

Troubleshoot Your Hardware

Sometimes the Realtek Network Controller not found error is caused by the problems with the network adapter or RAM. Just have a check on your hardware.

Step 1: Shut down your computer completely and unplug the power cable. If you are using a laptop, remove the battery.

Step 2: Open the computer case or remove the laptop cover and remove RAM from your motherboard.

Step 3: Leave RAM for half a day to interrupt the network controller’s Deep Sleep Mode.

Step 4: Put the memory chip back in your PC.

Step 5: Connect the power cable and battery, then power on your PC and check if the error is resolved.

Check the Power of the Network Controller in BIOS

Follow these steps to check whether the power of the network adapter is on in BIOS.

Step 1: Restart your computer and press a specific key to enter BIOS. If you don’t know how to go BIOS, refer to this post - How to Enter BIOS Windows 10/8/7 (HP/Asus/Dell/Lenovo, any PC).

Step 2: Look for Integrated NIC or Onboard Lan Setting or another one with Lan in its name.

Step 3: You will find the item is set to Enabled.

Step 4: Turn on the power, restart the PC and check the operation of the network card if the reverse is specified.

Reset BIOS

Sometimes “the Realtek Network Controller was not found” happens due to some faulty settings in your computer. To fix your issue, you can reset BIOS to default settings.

Step 1: Go to BIOS and find the setup defaults option.

Realtek Network & Wireless Cards Driver Download for windows
Tip: The item in your computer may be Load Setup Default, Load Optimal Defaults, Load Default Settings, Load BIOS Defaults, etc.
Network

Step 2: Press Enter to start resetting BIOS, then save the change and exit BIOS.

Realtek Network & Wireless Cards Driver Download For Windows 10

This tutorial teaches you how to reset BIOS/CMOS to default/factory settings in Windows 10 PC or laptop. Check the 3 steps guide.

Tip: If you find Realtek Network Controller not found in Device Manager, perhaps these methods won’t help and you can search for solutions online based on your actual case. In some forums like Reddit or tomshardware, you can find methods.

Final Words

Realtek Network & Wireless Cards Driver Download For Windows 8

Have you got “the Realtek Network Controller was not found” error in Windows 10/7? Now, you should get rid of the error after trying these solutions mentioned above.

0002-Diagnostic(2.0.2.12)_20160930_Win10Only.zip
9.8 MB
Download
112,320
Networking
Windows (all)

This is the official tool from Realtek. Use this program to identify problems with your Realtek Ethernet card.

Supported Products:

  • RTL8100E
  • RTL8101E
  • RTL8102E-GR
  • RTL8103E(L)
  • RTL8102E(L)
  • RTL8101E
  • RTL8103T
  • RTL8401
  • RTL8401P
  • RTL8105E
  • RTL8402
  • RTL8106E
  • RTL8106EUS
  • RTL8111B
  • RTL8168B
  • RTL8111
  • RTL8168
  • RTL8111C
  • RTL8111CP
  • RTL8111D(L)
  • RTL8168C
  • RTL8111DP
  • RTL8111E
  • RTL8168E
  • RTL8111F
  • RTL8411
  • RTL8111G
  • RTL8111GUS
  • RTL8411B(N)
  • RTL8118AS
Here's other similar drivers that are different versions or releases for different operating systems: Realtek network & wireless cards driver download for windows 8
    • July 26, 2018
    • Windows (all)
    • 9.2 MB
    • January 2, 2019
    • Windows (all)
    • 10.3 MB
    • January 2, 2019
    • Windows 10
    • 10.4 MB
    • January 2, 2019
    • Windows (all)
    • 10.3 MB
    • July 30, 2018
    • Windows 7
    • 10.6 MB
    • March 5, 2018
    • Windows 10
    • 9.2 MB
    • July 5, 2017
    • Windows (all)
    • 10.1 MB
    • July 12, 2017
    • Windows (all)
    • 10.2 MB
    • May 10, 2017
    • Windows (all)
    • 10.2 MB
    • March 23, 2017
    • Windows 7/8/10
    • 10.1 MB