Drivers Qlogic

downloaddriver-qlogic-qla2xxx-10.01.00.64.80.0_k.zipWhy can't I download this file?Qlogic Drivers For Windows 2016
  • Citrix Hypervisor

Who Should Install this Driver Disk?

Customers running a Citrix Hypervisor 8.x release who use Qlogic's qla2xxx driver and wish to use the latest version of the following:

Drivers Qlogic

Qlogic Drivers For Windows 2012 R2

Driver ModuleVersion
qla2xxx10.01.00.64.80.0_k

Issues Resolved In this Driver Disk

Includes general enhancements and bug fixes.

Installing the Driver Disk

Customers should use the Citrix Hypervisor CLI to install this update. Once the driver has been installed, the server must be restarted. As with any software update, Citrix advises customers to back up their data before applying this driver disk.

Please note that the attachment to this article is a zip file. It contains both the driver disk ISO mentioned below, and the source code for the driver. The zip file should be unzipped (to produce the driver disk ISO image), before carrying out the steps below. The source code file is not necessary for driver disk installation: it is provided to fulfill licensing obligations.

Installing as Part of a Clean Citrix Hypervisor Installation

Driver Logic App

Qlogic
  1. After you have selected your keyboard layout at the first installer prompt, you will be presented with a welcome screen. At this point, press F9 on your keyboard, and insert the CD with the driver disk in it, or use one of the other methods such as installation over the network.
    Note: If installation over HTTP or FTP is to be used, the ISO image must be unpacked at that location (i.e. the installer expects to find the contents of the ISO at that network location, not the ISO itself).
  2. The installer will proceed to attempt to load the driver. If this is successful, you can continue with the installation as normal. Near the end of the installation, you will be prompted to re-insert the driver disk (otherwise known as a Citrix Hypervisor supplemental pack) so that the driver can be installed onto disk. You must re-supply the driver disk at this point. Failure to do so will mean that the installation will not contain the new drivers. After this step, no further action is required.

If the installer fails to load the new driver from the driver disk, it is likely to be because an earlier version of the driver has already been loaded. In general, this is because a hardware component is present that is supported by the version of the driver that ships as part of XenServer (even if another component is present that requires a newer version of the driver). To avoid the existing driver being loaded, use the following procedure.

  1. Reboot the host, leaving the Citrix Hypervisor installation CD-ROM in the drive.
  2. At the boot: prompt, type:

    shell

  3. You will now be presented with a command prompt. Type the following:

    rmmod qla2xxx

    If this succeeds (i.e. there are no error messages printed), the installer's versions of the drivers have been unloaded. If error messages are presented, it is likely that other drivers depend on one or more of the drivers you are attempting to unload. If this is the case, please contact Citrix Technical Support.
  4. Type

    exit

    or press Control+D on your keyboard, to return to the installer.
  5. Use the procedure described above to provide the driver disk to the installer, which should now load correctly.

Installing the update by using the xe CLI

Perform the following steps to install the update remotely using the xe CLI:

  1. Download the update to a known location on a computer that has XenCenter installed.
  2. Upload the update:

    xe update-upload file-name=driver-qlogic-qla2xxx-10.01.00.64.80.0_k.iso

    Note: The UUID of the update is returned when the upload completes.


  3. Apply the update:

    xe update-apply uuid=af8bdadf-e148-4322-bf69-9c984e9d4481

  4. To complete the installation, restart the host. This ensures that the driver loads correctly.

Driver Logic Login

Files

Update Files

Qlogic
ComponentDetails
Filenamedriver-qlogic-qla2xxx-10.01.00.64.80.0_k.iso
File sha2568d64ded455d99f4c4bb20f646031439824c9b7fc8e9514cba742c0a004361af8
Source Filenamedriver-qlogic-qla2xxx-10.01.00.64.80.0_k-sources.iso
Source File sha2567f8f2dd750ace8a5c1da5c29ca609d134db22c8c92e70df327868dc2ae1c5278
Zip Filenamedriver-qlogic-qla2xxx-10.01.00.64.80.0_k.zip
Zip File sha256d882ccb731ecfb4169dd418b59c90437bf7d7197f5ba3e8a1337562f65e4c61d
Size of the Zip file162.04 MB

RPMs Provided

RPM Name
qlogic-qla2xxx-10.01.00.64.80.0_k-1.el7.centos.x86_64.rpm


More Information

For a list of the driver versions and the latest driver disk updates available, see Driver versions for XenServer and Citrix Hypervisor.

If you experience any difficulties, contact Citrix Technical Support.

For information on how to build driver disks, refer to Citrix Hypervisor Supplemental Packs and the DDK Guide .

Printable version

HPE QLogic P3P Multifunction Driver for Windows Server 2012 R2

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type:Driver - Network
Version:5.3.32.1130(24 Oct 2016)
Operating System(s): Microsoft Windows Server 2012 R2
File name:cp028936.exe (4.9 MB)
This Component Package contains the driver for the HPE QLogic P3P Multifunction NICs and HPE QLogic nx3 Multifunction NICs running under Microsoft Windows Server 2012 R2.

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

051df411d2362def43e41c0a5aa56c46bae797edd6ac9eecf21c4bd63d8cd964cp028936.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

Click the 'Install' button to proceed with the installation.

End User License Agreements:
HPE Software License Agreement v1

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important:

HPE recommends the firmware provided in the following firmware products, as applicable, for use with this driver:

  • HP QLogic P3 Online Firmware Upgrade Utility for Windows Server x64 Editions, version 4.0.0.19 or later
  • HP QLogic P3P Online Firmware Upgrade Utility for Windows Server x64 Editions, version 4.0.0.19(C) or later

Supported Devices and Features:

This driver supports the following network adapters:

  • HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
  • HP NC523SFP 10Gb 2-port Flex-10 Server Adapter
  • HP FlexFabric 10Gb 2-port 526FLR-SFP+ Adapter
  • HP CN1000Q Dual Port Converged Network Adapter

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product addresses an issue where the Virtual Memory Queue (VMQ) causes 100% CPU usage on a single core.

HPE recommends the firmware provided in the following firmware products, as applicable, for use with this driver:

  • HP QLogic P3 Online Firmware Upgrade Utility for Windows Server x64 Editions, version 4.0.0.19 or later
  • HP QLogic P3P Online Firmware Upgrade Utility for Windows Server x64 Editions, version 4.0.0.19(C) or later
Version:5.3.32.1130 (24 Oct 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product addresses an issue where the Virtual Memory Queue (VMQ) causes 100% CPU usage on a single core.


Version:5.3.30.1001 (30 Mar 2015)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This driver addresses an issue where Receive Side Scaling (RSS) fails to perform correctly when the adapter is teamed.


Version:5.3.27.606 (9 Sep 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This driver corrects an issue where Receive Side Scaling (RSS) configuration is not set after a device reset.


Version:5.3.26.605 (9 Sep 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This driver corrects an issue which can result in lower throughput in a Hyper-V environment using Virtual Machine Queue (VMQ).
This driver corrects an issue where fewer than the maximum number of VMQs is created.
This driver corrects an issue which can result in the driver being unloaded after being reset.
This driver corrects an issue which can result in a Windows Stop Error (BSOD) on a system with insufficient Message Signaled Interrupt – Extended (MSI-X) resources.
This driver corrects an issue which prevents proper Receive Side Scaling (RSS) distribution on P3 adapters.
This driver corrects an issue which can result in Large Receive Offload (LRO) failing after the Maximum Transmission Unit (MTU) size being updated.


Version:5.3.10.1101 (18 Feb 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The firmware bundled with this driver has been updated to version 4.0.593.


Type:Driver - Network
Version:5.3.32.1130(24 Oct 2016)
Operating System(s):
Microsoft Windows Server 2012 R2

Description

This Component Package contains the driver for the HPE QLogic P3P Multifunction NICs and HPE QLogic nx3 Multifunction NICs running under Microsoft Windows Server 2012 R2.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

051df411d2362def43e41c0a5aa56c46bae797edd6ac9eecf21c4bd63d8cd964cp028936.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

Click the 'Install' button to proceed with the installation.

Release Notes

End User License Agreements:
HPE Software License Agreement v1

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important:

HPE recommends the firmware provided in the following firmware products, as applicable, for use with this driver:

  • HP QLogic P3 Online Firmware Upgrade Utility for Windows Server x64 Editions, version 4.0.0.19 or later
  • HP QLogic P3P Online Firmware Upgrade Utility for Windows Server x64 Editions, version 4.0.0.19(C) or later

Supported Devices and Features:

This driver supports the following network adapters:

  • HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
  • HP NC523SFP 10Gb 2-port Flex-10 Server Adapter
  • HP FlexFabric 10Gb 2-port 526FLR-SFP+ Adapter
  • HP CN1000Q Dual Port Converged Network Adapter

Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product addresses an issue where the Virtual Memory Queue (VMQ) causes 100% CPU usage on a single core.

Important

HPE recommends the firmware provided in the following firmware products, as applicable, for use with this driver:

  • HP QLogic P3 Online Firmware Upgrade Utility for Windows Server x64 Editions, version 4.0.0.19 or later
  • HP QLogic P3P Online Firmware Upgrade Utility for Windows Server x64 Editions, version 4.0.0.19(C) or later

Revision History

Version:5.3.32.1130 (24 Oct 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product addresses an issue where the Virtual Memory Queue (VMQ) causes 100% CPU usage on a single core.


Version:5.3.30.1001 (30 Mar 2015)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This driver addresses an issue where Receive Side Scaling (RSS) fails to perform correctly when the adapter is teamed.


Version:5.3.27.606 (9 Sep 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This driver corrects an issue where Receive Side Scaling (RSS) configuration is not set after a device reset.


Version:5.3.26.605 (9 Sep 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This driver corrects an issue which can result in lower throughput in a Hyper-V environment using Virtual Machine Queue (VMQ).
This driver corrects an issue where fewer than the maximum number of VMQs is created.
This driver corrects an issue which can result in the driver being unloaded after being reset.
This driver corrects an issue which can result in a Windows Stop Error (BSOD) on a system with insufficient Message Signaled Interrupt – Extended (MSI-X) resources.
This driver corrects an issue which prevents proper Receive Side Scaling (RSS) distribution on P3 adapters.
This driver corrects an issue which can result in Large Receive Offload (LRO) failing after the Maximum Transmission Unit (MTU) size being updated.


Version:5.3.10.1101 (18 Feb 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

The firmware bundled with this driver has been updated to version 4.0.593.


Qlogic Drivers Vmware

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.