Drivers Olimex USB Devices

  1. Drivers Olimex Usb Devices Dongle
  2. Drivers Olimex Usb Devices Adapter
  3. Best Usb Devices

Where can I download the USB drivers for my device? Motorola Device Manager contains USB drivers and software to connect your Motorola phone or tablet to your computer using a USB cable. Sometimes devices connected to USB ports need to be re-set. It’s not unusual GSM modems and WiFi dongles to freeze and the only way to bring them back to life is to remove and re-attach. OLinuXino USB ports has power switches and current limiters which can be controller by Linux drivers. Olimex OpenOCD debuggers have JTAG by default. You would need an addiitonal adapter – ARM-JTAG-SWD. How to install ARM-USB-TINY to work with CrossWorks: Test with the FTDI drivers. The FTDI drivers can be downloaded from the following address:

Improvements and fixes

This update includes a fix for an incorrect device driver (“Microsoft – WPD – 2/22/2016 12:00:00 AM - 5.2.5326.4762”) that was released by a third-party on March 8, 2017 that affected a small group of users with USB connected phones or other media devices that rely on Media Transfer Protocol (MTP). If the driver is on your system, when any of these devices are connected, Windows will try to install this driver. These devices will not be connected until the driver is removed. This incorrect driver was removed from Windows Update the same day, but it may have been downloaded to your computer. After installing this update the incorrect driver will be removed.

How to get this update

This update will be downloaded and installed automatically from Windows Update. To get the stand-alone package for this update, go to the Microsoft Update Catalog website.

If you are not able to connect your phone or media device via USB and are not running one of these Windows versions, you can still remove this driver using the process described here:


Drivers Olimex Usb Devices Dongle

Joined: Mon. May 20, 2013
Location: So Cal
Posted by dusteater: Sun. Sep 10, 2017 - 05:41 PM

Drivers Olimex Usb Devices Adapter

Total votes: 0

I have searched and tried to find a solution to my problem but I just can't get anything to work. I got a new computer and am trying to get the programmer and software to work. I updated drivers and it shows correctly in Device Manager. I try to program a chip and I get the message that my firmware version is 1.16 and needs to be updated to 1.18. I run the update and I get the error that the update failed and to toggle power and try again. I pressed the upgrade button and then Studio showed that the programmer was disconnected. I tried to update the firmware through FLIP but I get an error that the USB device cannot be opened.

Best Usb Devices

Any ideas?