Download Segger USB Devices Driver

Technical Support

  1. Download Segger Usb Devices Driver Windows 10
  2. Download Segger Usb Devices Drivers
  3. Download Segger Usb Devices Driver Windows 7

Note: The Intel® USB 3.0 eXtensible Host Controller Driver is not supported on Windows XP. and Windows Vista. This is a new version release: Not sure if this is the right driver or software for your Intel® chipset? Run Intel® Driver & Support Assistant (Intel® DSA) to automatically detect driver or software updates. If drivers were not downloaded automatically by Windows Update, use Device Manager to refresh the driver from Windows Update, or contact the device manufacturer. I’m Moli, your virtual agent. I can help with Moto phone issues. NI Device Drivers provides popular NI instrument drivers you can use to control NI and third-party hardware. NI Device Drivers is a bundle that features most NI instrument drivers, including NI-DAQmx, NI-VISA, NI-SCOPE, and NI-SWITCH.

Using emUSB-Device Audio, an embedded device can be transformed into an audio recorder or an audio speaker. An audio jack and dedicated audio hardware is not necessarily available on every design. EmUSB-Device Audio allows the device to handle audio data irrespective of the available hardware, for example audio data played from a PC (Linux/Windows/Mac) can be saved directly onto an SD card.

On-Line Manuals

Download Segger USB Devices Driver

J-Link/J-Trace User's Guide

IntroductionCoreSight TechnologyInstall J-Link/J-Trace DriverConfigure µVisionUse J-Link/J-TraceDownload segger usb devices driver updaterUSBConfigure Cortex-M Devices for TracingµVision Windows

The J-Link/J-Trace driver, located in the folder ..ARMSegger of the Keil MDK-ARM, supports the J-Link/J-Trace adapters. When you connect the J-Link/J-Trace adapter for the first time, Windows will display the Found New Hardware wizard, which allows you to install the driver. You need Administrator rights to install the driver.

  1. Click I don't have the disk. Show me other options.
  2. Click Browse my computer for driver software (advanced).
  3. Enter ..ARMSeggerUSBDriver and click Next.
  4. When installed successfully, a confirmation screen is displayed.

When installation issues arise, perform these steps:

Download Segger Usb Devices Driver Windows 10

Download segger usb devices driver windows 10
  1. Open the Windows Device Manager (you may use devmgmt.msc in the command prompt).
  2. Expand Universal Serial Bus controllers. One devices should have the name J-Linkm driver. Where m is a number from 1 to 3; zero is not displayed.
  3. Right click the device name and select Update Driver Software...

Download Segger Usb Devices Drivers

Related Knowledgebase Articles

Download Segger Usb Devices Driver Windows 7


Development Tools
Hardware & Collateral




Cookie Settings Terms of Use Privacy Accessibility Trademarks Contact Us Feedback

Copyright © 2005-2019 Arm Limited (or its affiliates). All rights reserved.